Used machines
Wind sifter
IWS-1400 2-FT KL
Running time: 860 operating hours
Description
The INTEGRA IWS-1400 2-FT KL air classifier is the professional system with the largest performance spectrum in the medium grain size range from 8 to 45 mm.
As a so-called “semi-mobile system”, flexible relocation is guaranteed at any time, with all the advantages and static conditions of a permanently installed system.
The INTEGRA IWS-1400 2-FT KL is designed for a high throughput rate of 130 t/h with an oversize grain separation of 300 mm edge length and a purity of almost 99 %.
The main areas of application for the INTEGRA IWS-1400 2-FT KL are: Construction waste, slag, residual waste, mixed construction waste, substitute fuels, electrical scrap and track ballast.
Do you have any questions? We are at your disposal.
Execution
- Height-adjustable supports
- Classifier feed belt: AA: 3400 mm GB: 1400 mm, frequency-controlled
- Separating drum: Ø: 800 mm (Hardox), frequency-controlled
- Blower: 2 pieces á 22 kW, frequency-controlled
- Nozzle system: Two air nozzles (adjustable discharge angle)
- Heavy-duty conveyor belt: special design, hydraulically folding
- AA: 5660 mm, GB: 800 mm, steep conveyor belt with 32 mm V-profile incl. magnetic drum Fe discharge and VA chute
Generator set 160 kVA
Running time: 1,010 operating hours
Description
The 160 kVA generator set from Brinkmann & Niemeijer from 2020 was used for the demonstration and rental of windsifters and dosing bunkers.
The 180 hp 6-cylinder engine runs reliably even under difficult conditions.
With a tank capacity of 450 liters, the unit is self-sufficient for a long time.
Execution
- Total weight (without fuel): 2,185 kg
- Tank capacity: 450 l
- Dimensions: 3,300 mm x 1,200 mm x 1,956 mm
- Emission standard: EU Stage IIIA
- CEE sockets: 2x 16 A, 2x 32 A, 1x 64 A and 2x 125 A
Wind sifter
IWS-1800 M
Running time: 10,500 operating hours
Description
The INTEGRA IWS-1800 M is the flagship of the air separator series and is designed for maximum throughput rates.
Throughput rates of 160-180 t/h are possible with an oversize grain separation of 300 mm edge length and a purity of almost 99 %.
The main areas of application for the INTEGRA IWS-1800 M are: Construction waste, slag, residual waste, mixed construction waste, substitute fuels, electrical scrap and track ballast.
Do you have any questions? We are at your disposal.
Execution
- Classifier feed belt: AA: 3400 mm, GB: 1800 mm, frequency-controlled
- Separating drum Ø: 800mm, frequency-controlled
- Blower: 2x 30 kW motor, frequency-controlled
- Two-nozzle system (adjustable discharge angle), optional two-nozzle system
- Heavy-duty support belt: AA: 3300 mm
- Support legs: height-adjustable
- Power consumption: 75 kW
Conveyor belt
FBR 100-40-0700
Running time: 60 operating hours
Description
The mobile conveyor belt with a belt width of 1000 mm and a center distance of 7000 mm can be used universally.
The height-adjustable support feet can be adapted to suit the application. The Y-slope conveyor belt with 32 mm cleat heights allows bulk materials to be conveyed at inclines of up to 35° without any problems. The conveyor belt can therefore be used as a stockpile belt or as a transfer belt, for example. With a drive power of 3 kW, approx. 100 t/h (at a density of 1.1 t/m³) of material can be moved at full capacity.
As an option, the conveyor belt can be equipped with a magnetic drum and a VA chute to separate ferrous metals from the material flow.
Execution
- Center distance: 7000 mm
- Belt width: 1000 mm
- Frame height: 400 mm
- Gradient: 0 - 35 °
- Motor: 3 kW
- Support legs foldable + height-adjustable
- Pull cord switch: on both sides
- Optional: Magnetic drum + VA slide
